Inlet – Grizzly G1028Z/G1029 User Manual
Page 16
-14-
G1028Z/G1029 Dust Collector
Figure 10.
Tightening steel band.
3.
Slip the steel band around the bag and tight-
en down as shown in
Figure 10.
Inlet
Press the “Y” inlet onto the inlet cover flange as
shown in
Figure 11.
The inlet is secured to the
collector body by a press-on fit.
Figure 11.
Installing “Y” inlet.
4.
Slip the bottom collection bag over the bot-
tom edge of the collector and pull the strap
tight to secure the bag
.
5.
Place the steel band with the quick clamp
over the bag and clamp on the tightest notch
possible.
DO NOT force the clamp. Instead, choose
the next notch over, then clamp in place.
See also other documents in the category Grizzly Vacuums:
- G0548Z (56 pages)
- G0671 (2 pages)
- G0671 (56 pages)
- G0638 (60 pages)
- G0703 11 (40 pages)
- G1028 (3 pages)
- G1029 (24 pages)
- G9955 (20 pages)
- Noise Reduction Kit for Cyclone s H8165 (1 page)
- Model G0638 (60 pages)
- G1028Z/G1029Z (40 pages)
- G1029Z (40 pages)
- G0637 (60 pages)
- G1029 (32 pages)
- Dust Hood G1837 (1 page)
- G1030 (26 pages)
- G0673 (56 pages)
- G0562 (2 pages)
- G1028Z (24 pages)
- G0441 (52 pages)
- Model G0562 (36 pages)
- G0710 (36 pages)
- Air Wonder Vacuum Kit H0587 (2 pages)
- G0442 (60 pages)
- G9958 (28 pages)
- G5954 (32 pages)
- G0508 (56 pages)
- G0631 (32 pages)
- 1 1/2 HP Cyclone G0703 (56 pages)
- G0672 (3 pages)
- G1030Z2 (48 pages)
- G1030Z2 (48 pages)
- H0602 (9 pages)
- G1163 (22 pages)
- G1032 (2 pages)
- 5HP Cyclone G0442 (60 pages)
- G9975 (2 pages)
- T10252 (4 pages)
- Cyclone s G0440 (56 pages)
- Top Bag G4832 (1 page)
- Model G8027 (32 pages)
- 50 Gallon Dust Collection Bag Holder H8174 (2 pages)
- G0689 (44 pages)
- G0583 (36 pages)