GE EPM9450Q - Manual (Page 77)

69
differ depending on whether the EPM is configured as Wye or Delta. Please note that
the Normal Scroll Delta and Alternate Scroll Delta lists contain several parameters
marked with an asterisk; these parameters were included in the wizard for
programming reasons, but are not valid for Delta configurations and should not be
used.
Normal Scroll, Wye Normal Scroll, Delta
Current, RMS Phase A Current, Phase A
Current, RMS Phase B Current, Phase B
Current, RMS Phase C Current, Phase C
Current, RMS Neutral Current, RMS Neutral *
Voltage, RMS Phase A–N Voltage, RMS Phase A–N *
Voltage, RMS Phase B–N Voltage, RMS Phase B–N *
Voltage, RMS Phase C–N Voltage, RMS Phase C–N *
Voltage, RMS Phase A–B Voltage, RMS Phase A–B
Voltage, RMS Phase B–C Voltage, RMS Phase B–C
Voltage, RMS Phase C–A Voltage, RMS Phase C–A
Watts, Phase A Watts, Phase A–B
Watts, Phase B Watts, Phase B–C
Watts, Phase C Watts, Total
Watts, Total Watts, Demand
Watts, Demand Watts, Peak Demand
Watts, Peak Demand Vars, Phase A–B
Vars, Phase A Vars, Phase B–C
Vars, Phase B Vars, Total
Vars, Phase C Volt-amperes, Phase A–B
Vars, Total Volt-amperes, Phase B–C
Volt-amperes, Phase A Volt-amperes, Total
Volt-amperes, Phase B Power Factor, Total
Volt-amperes, Phase C Watthours, Total
Volt-amperes, Total Varhours, Total Lag (+)
Power Factor, Total Varhours, Total Lead (–)
Watthours, Total Volt-ampere-hours, Total
Varhours, Total Lag (+) Frequency, in hertz
Varhours, Total Lead (–)
Volt-ampere-hours, Total
Frequency, in hertz