beautypg.com

Safety instructions for power tools, Notice – Grizzly G5963 User Manual

Page 4

background image

-2-

G5963 Surface Grinder

Safety Instructions For Power Tools

SECTION 1: SAFETY

5.

KEEP CHILDREN AND VISITORS AWAY.
All children and visitors should be kept a
safe distance from work area.

6. MAKE WORK SHOP CHILD PROOF with

padlocks, master switches, or by removing
starter keys.

7. DON’T FORCE TOOL. It will do the job

better and safer at the rate for which it was
designed.

8. USE RIGHT TOOL. Don’t force tool or

attachment to do a job for which it was not
designed.

1. KEEP GUARDS IN PLACE and in working

order.

2. REMOVE ADJUSTING KEYS AND

WRENCHES. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before turning on.

3. KEEP WORK AREA CLEAN. Cluttered

areas and benches invite accidents.

4. DON’T USE IN DANGEROUS ENVIRON-

MENT. Don’t use power tools in damp or
wet locations, or where any flammable or
noxious fumes may exist. Keep work area
well lighted.

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided,
MAY result in minor or moderate injury. It may also be used to
alert against unsafe practices.

This symbol is used to alert the user to useful information about
proper operation of the equipment.

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This man-
ual uses a series of symbols and signal words which are intended to convey the level of importance of
the safety messages. The progression of symbols is described below. Remember that safety messages
by themselves do not eliminate danger and are not a substitute for proper accident prevention mea-
sures.

NOTICE