GE GNWH38F - Manual (Page 4)

4
Ref. No. Part No. Part Description
001 HDKIT Grounding Clamps and Wire 1
001 HDKIT 3 ⁄
4
″
Copper Tube Fittings 1
002 HDCAP Head 1
003 WHTIMER Timer 1
004 HDRING O-Ring 1
005 HDSMP Canister 1
006 HDWRNCH Canister Wrench 1
007 FXHTC Filter Element—Carbon Filter 1
FXHSC Filter Element—Pleated
008 HDBRKT Mounting Bracket 1
999 49-50125-2 PM Installation Instructions 1
To obtain replacement parts, call toll-free 800.626.2002 (U.S.),
800.663.6060 (Canada–English), 800.361.3869 (Canada–French).
Timer Installation and Reset Instructions
Timer cap
Timer seat
Timer battery installation and change
Insert coin or screwdriver in the slot between timer
cap and base. Gently pry them open and separate
timer base from cap. Install or change 2 new AAA
1.5 volt batteries. After having the batteries in place,
line up the base and cap and snap them back
together.
It is recommended to change the batteries at least
every 2 filter changes (6 months).
Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc) or rechargeable
(ni-cad, ni-mh, etc.) batteries.
Installation of timer
Hold the timer body in the center and gently push
timer to its seat at the top of the head. Or use the
magnetic timer body to attach it in a remote location
for easy viewing.
Timer reset and application
After new batteries are installed or filter is changed,
push and hold the timer blue reset button for
approximately 5 seconds. Release the reset button after
the light flashes 5 times. The light will flash again in
90 days to remind you that it is time to change the filter.
Blue reset button
008
PARTS LIST
003
002
004
005
006
999
007
001
001
2 AAA
batteries
Timer base
Head