beautypg.com

Operation and service information, Transporting vehicle – Greenlee 28809-G01 User Manual

Page 30

background image

OPERATION AND SERVICE INFORMATION

Page 14

Owner’s Manual and Service Guide

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

TRANSPORTING VEHICLE

TOWING

T h i s v e h i c l e i s n o t
designed to be towed.

It is recommended that the vehicle be moved by placing
the entire vehicle on a trailer, flatbed truck or other suit-
able transport.

NEUTRAL LOCK

To prevent the driven clutch from turning the rear wheels
during service operations, a neutral lock is located on the
direction selector.

To operate:

Turn key switch to ‘OFF’ and lift seat. Pull out and rotate
the neutral lock pin handle so that the pointed portion of
the handle is to the side of the direction selector cam
(Ref. Fig. 18 on page 14). Move direction selector
towards the area between ‘F’ and ‘R’. During that motion,
the pin will snap into the hole in the direction selector
mounting bracket preventing any movement. When in
this position, the direction selector remains locked in the
neutral position. To unlock the direction selector, pull the
neutral lock pin handle out and rotate until the pointed
portion of the handle fits into the hole in the direction
selector cam.

HAULING

To reduce the possibility
of severe injury or death
while transporting vehi-
cle:

Secure the vehicle and contents.

Never ride on vehicle being transported.

Always remove windshield before transporting.

Maximum speed with sun top installed is 50 mph
(80 kph).

If the vehicle is to be transported at highway speeds, the
sun top must be removed and the seat bottom secured.
When transporting vehicle below highway speeds, check
for tightness of hardware and cracks in sun top at mount-
ing points. Always remove windshield when transporting.
Always check that the vehicle and contents are ade-
quately secured before transporting. The rated capacity
of the trailer or truck must exceed the weight of the vehi-
cle (see GENERAL SPECIFICATIONS for vehicle
weight) and load. Lock the park brake and secure the
vehicle using ratchet tie downs.

Fig. 18 Neutral Lock

!

!

Unlocked

To
Lock

Hole in Direction
Selector Mounting
Bracket

Hole in Direction
Selector Cam

Neutral Lock
Pin Handle

1

2

Ref Nlk 2

!

!