Read entire manual. Failure to follow all guides and rules could cause personal injury or property damage.
• Check with your local public works department for plumbing codes. You must follow their guides as you install the Water Filtration

system.

• Use the Water Filtration system on a potable, safe-to-drink, home COLD water supply only. The filter cartridges will not purify water

or make unsafe water safe to drink. DO NOT use on HOT water (100°F. max).

• Protect the Water Filtration system and piping from freezing. Water freezing in the system will break it.

• Your Water Filtration system will withstand up to 125 psi water pressure. If your house water supply pressure is higher than 100 psi

during the day (it may reach higher levels at night), install a pressure reducing valve before the system.

WARNING:

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before

or after the system. GNUL30Z and GXUL30Z are certified for cyst reduction and may be used on disinfected water that may
contain filterable cysts. The water should be tested periodically to verify that the system is performing satisfactorily.
Small parts remaining after the installation could be a choke hazard. Discard safely.

7178977 (10-97) 215C1001P003-2

For Use and Care questions call: GE Answer Center® 800.626.2000

Pub. No. 49-5809-2

GENERAL ELECTRIC COMPANY, Appliance Park, Louisville, KY 40225

GNUT05Z, GXUT05Z, GNUV10Z,

GXUV10Z, GNUL30Z, and GXUL30Z are

tested and certified to ANSI/NSF Standard

42 for particulate reduction Class I,

chlorine reduction Class I and taste and

odor reduction.
GNUV10Z and GXUV10Z are tested and

certified to ANSI/NSF Standard 53 for

volatile organic chemical reduction.
GNUL30Z and GXUL30Z are tested and

certified to ANSI/NSF Standard 53 for cyst,

turbidity and lead reduction.

NSF

Table of contents

GE SMARTWATER GNUL30Z User Manual

Ge smartwater, Water filtration system installation instructions

Document Outline