Gold's Gym Platinum GGSY3058.0 - Manual (Page 22)

22
41. Attach the Right Butterfly Pad (35) to the Right
Butterfly Arm (26) with two M6 x 65mm Button
Screws (91) and two M6 Washers (114).
Repeat this step for the Left Butterfly Pad (34).
41
26
35
34
114
91
Seat Assembly
39. Wrap the Leg Lever Cable (51) around a 90mm
Pulley (48). Attach the Pulley to the Left Press
Arm (15) with an M10 x 50mm Bolt (97), two Half
Guards (55), an M10 Washer (80), and a Cable
Trap (56).
Make sure that the Cable Trap and
the Half Guards are oriented as shown.
39
55
56
55 77
15
48
51
80
97
40. Attach the Leg Lever Cable (51) to the Upright (2)
with the M10 x 120mm Bolt (115), an M10
Washer (80), a 7mm Spacer (111), and an M10
Nylon Locknut (77).
See the inset drawing.
Make sure that the flat edge of the Cable is
against the Upright.
40
2
51
77
80
111
Flat Edge
115