Genicom microLaser 210 - Manual (Page 5)

Mar 00 Genicom Publication No. GEG-99054
microLaser 210 User Guide v
Navigating the Control Panel Menus 3-4
Menu Structure 3-6
Paper Menu 3-7
Interface Menu 3-9
PS Menu 3-10
PCL Menu 3-11
System Menu 3-13
Quality Menu 3-15
Functions Menu 3-16
Status Menu 3-17
Chapter 4 Maintaining the Printer 4-1
Upgrading Printer Firmware 4-2
Upgrading Firmware Using the Parallel Interface 4-2
Upgrading Firmware Using the Network Interface 4-2
Replacing Printer Components 4-3
Replacing the Toner Cartridge 4-3
Replacing the Fuser 4-6
Replacing Feed Roll, Nudger Roll, and Retard Roll 4-9
Replacing the BTR Roller 4-14
Cleaning the Printer 4-17
Cleaning the Exterior 4-17
Cleaning the Interior 4-19
Moving the Printer 4-21
Moving the Printer a Short Distance 4-21
Moving the Printer a Long Distance 4-21
Storing the Printer for Long Periods of Time 4-22
Chapter 5 Troubleshooting 5-1
Installation Problems 5-2
Inoperative Printer 5-3
No Ready Message 5-3
Noise, Smoke, or Smell 5-3
Paper Jams 5-4
Clearing an E2 Paper Jam 5-6
Clearing an E3 Paper Jam 5-8
Clearing an E4 Jam 5-10