Removing the duplexer, Removing the duplexer 6-13 – Genicom microLaser 210 User Manual
Page 127
Mar 00
Genicom
Publication No. GEG-99054
microLaser 210 User Guide
6-13
Removing the Duplexer
Removing the Duplexer
Use the following procedure to remove the duplexer:
1.
Turn off the printer and disconnect the AC power cord from the AC wall outlet..
2.
If you are using the paper tray in its extended position, remove the paper tray from the
printer.
3.
Squeeze the tabs on the top left of the rear cover, and pull the cover to open it.