Gefen 8x8 EXT-DVI-848 - Manual (Page 12)

9
1 Direct Select Buttons
When this unit is attached to a CAT-5 port that corresponds to a display on
the 8x8 DVI Matrix, use buttons 1 through 8 to select what source that display
will be viewing. Buttons 1 through 8 directly correspond to DVI source inputs 1
through 8 on the 8x8 DVI Matrix.
2 IR Receiver
This port will receive commands from the RMT-8-IR remote control (included
with the EXT-RMT-MATRIX-848) for remote controlled switching at the extended
location.
3 Active Input LED Indicator
1 through 8 LED indicators that will visually acknowledge which source is
currently selected.
4 CAT-5 Input Port
Connect a CAT-5 cable between this port and the CAT-5 remote switching ports
(Item 1 through 8 on page 6) for remote switching.
5 IR EXTension Eye
Connect the optional IR Receiver Extender (part# EXT-RMT-EXTIR) to this port.
6 RS-232 Serial Control Port
This port can be used to control switching via RS-232 serial communication.
EXT-RMT-MATRIX-848 PANEL DESCRIPTIONS