GE ML2400 User Manual

Page 24

Text mode
Original mode

QS–20

MULTILINK ML1600/2400 ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE

QUICK START GUIDE

Locate and click on the Ethernet card (it will have TCPIP Protocol
as part of its name).
The Ethernet card is typically referred to as an Ethernet adaptor.

Select Use the following IP address then enter a unique IP address
(from 3.94.247.001 to 3.94.247.254 if using our test network
address range).

Enter the subnet mask which, if using our test network, will be
255.255.252.0.

Select OK, then OK again to exit the LOCAL AREA NETWORK
PROPERTIES menu.

Connect the computer’s Ethernet port to the switch using a
straight-through cable.

Ensure that the link LED come on, on both the switch and PC.