Grizzly Oscilatign Spindle GO739 - Manual (Page 5)

Model g0739 (Mfg. since 2/12)
-3-
figure 1. Machine identification.
Identification
spindle hex nut spindle
drum and sanding
sleeve
on/oFF paddle switch w/disabling Key
table insert
table
spindle Washers
(not shown)
table inserts
sander Body
power
Cord
dust port
drums and sanding sleeves
spindle Washer
for your Own Safety Read This Manual
before Operating Spindle Sander
a) Wear eye protection.
b) Support workpiece on worktable.
c) Minimize pinch hazards. use the smallest
table insert possible with sanding drum.
d) Avoid kickback. feed workpiece against
rotation of drum.
e) Avoid entanglement with spinning drum.
Do not wear gloves, necktie, or loose
clothing. Tie back long hair.