GTO 2502 - Manual (Page 11)

7
IMPORTANT SAFETY INSTRUCTIONS
These warning labels should be found at the locations
specified below. If any of them are missing,
immediately contact GTO for replacements.
!
Warning signs (2 enclosed) to be installed on each side
of the gate (3–5 feet above the bottom of the gate)
Maximum Gate: 500 lb. (226.7 kg); 16 ft. (4.8 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 25 W
Class I, II, III and IV Vehicular Swing Gate Operator.
Serial Number: XXXXXXXXXX
#xxxxxxx
Conforms to UL 325 STANDARDS
TO MANUALLY OPEN AND CLOSE THE GATE:
1. Turn control box power switch OFF.
2. Disconnect front or rear mount from gate bracket.
3. Pull opener away from front or rear mount.
DC 2500 Series
GTO, Inc. Tallahassee, Florida USA
Disconnect operator ONLY when the control box power
switch is OFF and the gate is NOT moving.
LISTED
US
Product identification and manual operation instruction
label (1) installed on control box cover
Logo and warning labels (2) installed on each side of
opener housing
C