Grizzly T23091 - Manual (Page 4)

Model t23091 1 ⁄
4
" Air die grinder -2 -
safety
safety instructions for pneumatic tools
Keep all safety devices in place
and in working order.
remove adJusting Keys and
Wrenches. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before operation.
Keep WorK area clean. Cluttered
areas and benches invite accidents.
Keep children and visitors
aWay. All children and visitors should be
kept at a safe distance from work area.
maKe WorKshop child proof.
Make sure to lock your shop and shut-
OFF the power and air supply.
do not force tool. it will do the job
better and safer at the rate for which it was
designed.
use the right tool. do not force tool
or attachment to do a job for which it was
not designed.
do not use under the influence
of drugs or alcohol, or When
tired.
use correct air pressure.
exceeding the maximum psi rating
of this tool may cause seal damage,
unpredictable operation, or line burst.
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates an imminent hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment. NOTICE