GE ZDWR240 - Manual (Page 9)

Removing
full extension
drawers All of the full extension drawers pull out
so bottles can be conveniently added or
removed.
Any of the full extension drawers can be
removed to store larger bottles.
To remove:
1. Pull the full extension drawer out to the
STOP position.
2. Push the tab on right drawer guide down
while pulling the tab on left guide up,
and pull the drawer out.
To replace:
1. Push the drawer slide arm back into
the unit.
2. Pull the small slide sub-assembly
completely forward.
3. Insert the sides of the drawer back into
the guides.
4. Push until the tabs lock into place.
Tab (push tab down on
right drawer guide, pull
tab up on left drawer
guide)
NOTE: Make sure the tabs on the full
extension drawer guides are fully engaged
before loading any bottles. Pull the drawers
out all the way to the STOP position and
push back in several times to make sure
locking tabs are properly engaged.
To replace, push drawer slide
arm back into unit Pull small slide sub-assembly
completely forward
9
Interior light
and light pad The interior light makes it easy to view
your wine labels and enhances the display
of your collection.
When the light pad is pressed and the word
ON is displayed, the light will remain on for
one hour before automatically turning off.
When the light pad is pressed and the word
OFF is displayed, the light will come on
only when the door is opened.
For best viewing, do not store a bottle
on the top shelf directly under the light.
Remember to turn off the light when it
is no longer needed.
Appearance may vary
Controls and Features
Wine Reser ve
Sub-assembly Sub-assembly