GE ZDWR240 - Manual (Page 12)

12
Care and Cleaning
Wine Reser ve
Unplug the wine reserve before cleaning. If the unit is in a built-in location,
remove power at the circuit breaker.
Light bulb
replacement Unplug the wine reserve before replacing
the light bulb. If the unit is in a built-in
location, remove power at the circuit breaker. To remove the light shield, push in the tab
on the left side of the shield and lower it.
Replace with a 15 watt appliance bulb.
If the power fails, open the door as
infrequently as possible to maintain
the temperature. A gradual rise in
temperature should not have any
adverse effect on the wine. If it is extremely hot, you may want to move
the wine to the coolest location you can
find until power is restored.
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
In the event
of a power
failure
For your
safety
Preparing
to move Secure all loose items such as drawers by
taping them securely in place to prevent
damage.
Be sure the wine reserve stays in an upright
position during moving.