Gateway 8450R - Manual (Page 4)

11 Tighten the captive thumbscrew at the bottom of the
power supply to secure it in place.
12 Place the fan tray in the chassis and secure it with the
screws you removed in Step 5.
13 Reconnect the cables you removed in Step 4.
14 Place the upper drive bay bracket on the top of the chassis.
Make sure the tabs on the bottom of the bracket fit into
the slots at either side of the chassis.
15 Slide the upper drive bay bracket back to set the tabs, then
replace the four screws you removed in Step 3.
16 Close the case.
17 Reconnect the power cord and all external peripherals,
then turn on the server.
A MAN 8450R POW SUPPLY UPDR0 8/00
8506762.fm Page 4 Thursday, August 10, 2000 1:32 PM