Grizzly G1019Z - Manual (Page 9)

Model G1019Z 14" Bandsaw -7-
Grizzly Industrial, Inc. is proud to offer the Model
G1019Z 14" Bandsaw. The G1019Z is part of
Grizzly’s growing family of fine woodworking and
metalworking machinery. When used according
to the guidelines stated in this manual, you can
expect years of trouble-free, enjoyable operation,
and proof of Grizzly’s commitment to customer
satisfaction.
The Model G1019Z is intended for home and
medium-duty professional use. The G1019Z fea-
tures cast iron construction for rigidity and
strength, a solid cast iron table, an open steel
stand, fence and miter gauge. A 2" dust port and
1 ⁄
2
" blade are also included. The electrical pack-
age consists of a 3450 R.P.M., 1 H.P. capacitor
start motor, locking toggle switch and cord set. All
running parts utilize shielded ball bearings, which
require no lubrication for the life of the bearings.
We are also pleased to provide this manual with
the Model G1019Z. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our effort to produce the best documenta-
tion possible. If you have any comments regard-
ing this manual, please write to us at the address
below.
Grizzly Industrial, Inc.
C /
O
Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
SECTION 3: INFORMATION
Above all else, we stand behind our machines.
We have an excellent service department at your
disposal should the need arise. If you have any
service questions or parts requests, please call or
write to us at the location listed below.
Grizzly Industrial, Inc.
2406 Reach Road
Williamsport, PA 17701
Phone:(570) 546-9663
Fax:(800) 438-5901
E-Mail: [email protected]
Web Site: www.grizzly.com
Address after fall 2001:
Grizzly Industrial, Inc.
1203 Lycoming Circle
Pennsdale, PA 17756
Commentary
The specifications, drawings, and photographs
illustrated in this manual represent the Model
G1019Z as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep it
for reference.
Read the manual before
assembly and operation.
Become familiar with
the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.