Epson EB 1735W User Manual
Page 98
98
Reading Problem Mail Notification Function (EB-1735W/1725 only)
When the Mail Notification function is set to "On" and a problem/
warning occurs in the projector, the following e-mail is sent.
Subject: EPSON Projector
Line 1: The name of the projector where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table
shows the details that are given in the message for each item.
To deal with problems/warnings, see "Reading the Indicators"
(s
Message
Cause
Internal error
Internal Error
Fan related error
Fan Error
Sensor error
Sensor Error
Lamp cover is open.
Lamp Cover Open
Lamp timer failure
Lamp Failure
Lamp out
Lamp Error
Internal temperature error
High Temp Error
(Overheating)
High-speed cooling in progress
High Temp Warning
Lamp replacement notification
Replace Lamp
No-signal
No Signal
No Signal is input to the projector.
Check the connection status or check
that the power for the signal source is
turned on.
Auto Iris Error
Auto Iris Error
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-): A projector problem has been dealt with