Epson EB 1735W - Manual (Page 80)

Replacing Consumables 80
Replacing the Lamp
f Lamp replacement period
It is time to replace the lamp when:
• The message "Replace the lamp. Replace the lamp. "is displayed
when you start projecting.
• The lamp indicator flashes orange.
• The projected image gets darker or starts to deteriorate.
A message is displayed.
Flashing orange
Attention
• The lamp replacement message is set to appear after the following
time periods in order to maintain the initial brightness and quality
of the projected images. s "Brightness Control"
p.43
When used continually at high brightness: About 2900 hours
When used continually at low brightness: About 3900 hours
• If you continue to use the lamp after the replacement period has
passed, the possibility that the lamp may explode increases. When
the lamp replacement message appears, replace the lamp with a
new one as soon as possible, even if it is still working.
• Depending on the characteristics of the lamp and the way it has
been used, the lamp may become darker or stop working before
the lamp warning message appears. You should always have a
spare lamp ready incase it is needed.