GarrettCom DS50 - Manual (Page 8)

Magnum DS50 / DS60s Dual Speed Hubs Installation and User Guide (06/02)
1.2 Ordering Information
Magnum DS50 / DS60 Dual-speed Hubs Plus
Models
Magnum DS60C Six dual speed ports, five 10/100 Dual-speed shared “hub”
ports plus one 10/100 switched port, with shielded RJ-45
connectors and front-mounted LED’s. The port #6 switched
port is a separate collision domain with wire-speed (10/100)
filtering and forwarding of traffic, 1Mb dynamically allocated
packet buffers and 8K-entry self-learning address table. The
selection of Full Fixed and Auto-negotiation for port #6 can
be set through manual switch. Internal universal power
supply, up-link switch or port #1. Optionally available with
24VDC and -48VDC internal power supply.
Magnum DS60F-MSC Same as DS60C except 6 th port is switched
fiber port, multi-mode SC, can be set as Full duplex (by
default) or Half-duplex by manual switch underneath.
Magnum DS60F-SSC Same as DS60C except 6 th port is switched
fiber port, single-mode SC, supports 20Km distance
Magnum DS60F-SSC Same as DS60C except 6 th port is switched
fiber port, single-mode SC, Long reach 40Km distance
Magnum DS50 Same as Magnum DS60C, but without the switched port # 6,
has only the 5 repeater ports with dual speed (10/100)
capability.
MST Conversion Special order item, convert fiber SC port to ST-type connector.
GarrettCom reserves the right to change specifications, performance
characteristics, and/or model offerings without notice.
4
www GarrettCom com . .