GE DV-354 - Manual (Page 42)

The Initial Settings Menu
DTS Out
l
Default setting: Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is compatible with high
sampling rates (96 set this to
otherwise set it to 96kHz 48kHz (96
audio is converted to a more compatible 48
Check the manual that came with the
other component if you’re unsure whether it
is 96 compatible.
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to Off. Check the
manual that came with the other
if you’re unsure whether it is DTS compat-
i
MPEG Out
l
Default setting: MPEG PCM
You only need to make this setting
connected this sys to an AV receiver (or
other component) using one of the digital
outputs.
Options
Note
l
If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS
96kHz PCM Out
l
Default setting: 96kHz 48kHz
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
If your AV receiver (or other connected
component) is compatible with MPEG
set this to MPEG, otherwise set it to MPEG
PCM (MPEG audio is converted to more
compatible PCM audio), Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compat-
i ble.
E n