Global Machinery Company LS236LS - Manual (Page 3)

WARNING.
1. It may be more difficult to see the laser line in
conditions of bright sunshine and on certain surfaces.
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated
for additional protection.
Conforms to relevant standards for
electromagnetic compatibility.
Specifications
Voltage: 230–240V ~ 50 Hz
Input power: 2300W
No load speed: 4500min
-1
Blade diameter: Ø235mm
Blade teeth: 20 TCT
Blade kerf: 2.5mm
Blade arbour: 25mm
Bevel capacity: 0 to 45°
Depth of cut at 90°: 87mm
Depth of cut at 45°: 56mm
Insulation: Double insulated
WARNINGS.
1. Never use a blade thinner than 1.2mm or thicker than
2.5mm
2. Do not use High Speed Steel (HSS) blades.
3
Dear Customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Caution. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Environmental protection
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.