GE 21018 - Manual (Page 31)

31
3. Press the CID/VOL (/\) button to review the oldest CID record first.
As you review CID records, the display shows you the following
information for each call:
• The telephone number of the caller.
• The number of the call, with regard to the order received.
• The name of the caller, if this service is available in your area.
• Time and date the call was received.
• NEW appears for all calls that have not been previously reviewed.
• REPT shows in the display for a call that has not been previously
reviewed but is received from the same number more than once.
NOTE: Check with your local phone company regarding name service availability.
S
TORING
CID R
ECORDS IN
I
NTERNAL
M
EMORY
You may also store CID information in the phone’s internal memory. You
may not reformat CID records stored in memory.
TIP: To prevent the CID information from automatically being deleted, you
may want to store it in the phone’s memory.
NOTE: It is important that you format CID records correctly before storing in
internal memory.
1. Make sure the phone is OFF (not in talk mode).
2. Use the CID/VOL (/\ or \/) button to scroll to the desired CID record.
3. Press the MEM key to display SELECT MEMORY 01-50 .
4. Use the touch-tone pad to enter a memory location number (for
example, press 01 to store the record in memory location one).
NOTE: If the memory location is occupied, “REPLACE MEMO?” is displayed,
and you must confirm replacement by pressing the MEM button.
NOTE: Press the *EXIT button once to keep the previous setting and return
to the sub-menu.