GE 21018 - Manual (Page 28)

28
8. To enter another name and number in a different memory location,
return to step 2 and repeat the process.
S
TORING THE
L
AST
N
UMBER
D
IALED
1. Repeat steps 1 through 6 in Storing a Name and Number in Memory.
2. Press the REDIAL button on the handset.
3. Press the MEM button to save. You will hear a confirmation tone.
NOTE: If the redial number has more than 20 digits, it cannot be stored in memory.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
(
OF A
S
TORED
N
UMBER
)
Press the # button on the handset’s touch-tone pad to insert a delay in
dialing sequence when a pause is needed to wait for a dial tone (for
example, after you dial 9 for an outside line, or to wait for a computer
access tone.) Each pause counts as one digit in the dialing sequence.
R
EVIEWING
R
ECORDS
S
TORED IN
M
EMORY
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-50 .
3. Press the CID/VOL (/\ or \/) buttons to scroll the records, or use the
handset’s touch-tone pad to enter the memory location number.
C
HANGING
R
ECORDS
S
TORED IN
M
EMORY
Follow the procedure for Storing Names and Numbers in Memory, except
replace a stored telephone number with a new one.
D
ELETING
R
ECORDS
S
TORED IN
M
EMORY
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEM key to display SELECT MEMORY 01-50 .
3. Press the CID/VOL (/\ or \/) button to scroll to the record you want to
delete or use the touch-tone pad to enter the desired memory location.
4. Press the DEL button to mark the record for deletion. The display
shows DELETE?
5. Press the DEL button to delete the record. DELETED shows in the display.
NOTE: If you don’t want to change or delete a record, simply press the
*EXIT button, or wait for one minute to exit the review mode automatically.