GE 21018 User Manual

Page 18

3. Use the touch tone pad on the handset to select 1 or 2, or use the CID/

VOL (/\ or V) button to scroll to your selection. 1ON is the default setting.

4. Press the MUTE/PROG button to confirm and the key tone setting shows

in the display.

EGISTRATION

This setting may be made with the handsets only. Your dual handsets are
pre-registered and ready to use. It is not recommended that handset be
registered again unless absolutely necessary.

1. If necessary, press the MUTE/PROG button to go to the REGISTRATION

menu. The default is 2 NO.

2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CID/

VOL (/\ or V) button to scroll to 1 YES or 2 NO.

3. If you select 1 YES, press the MUTE/PROG button to confirm your

selection.

HOLD BASE PAGE WAIT FOR BEEP

shows in the display.

4. Press and hold the page button on the base unit until you hear a long

tone at the handset.

HANDSET X REGISTERED

shows in the handset

display, where X is the handset name. You will hear a confirmation tone.

-R

EGISTRATION

This setting may be made with the handsets only. De-registration
cancels registration. During the de-registration process, keep the
handset near the base.

1. If necessary, press the MUTE/PROG button to scroll to the

DEREGISTRATION menu. The default is 2 NO.

2. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the CID/

VOL (/\ or V) button to scroll to 1 YES or 2 NO.

WARNING:

It is not recommended that a handset be de-registered unless

absolutely necessary because once a handset is de-registered, that handset's
telephone features cannot be used until the handset is re-registered.

3. Select NO, if you do not want to de-register.