GE Monogram ZBD1800 - Manual (Page 7)

7
Dishwasher
Control
Settings
Cycle
Sequence
1. Wash Cycles
HEAVY WASH For heavily soiled dishes or cookware. Everyday dishes may be included.
NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils.
NOTE:
Many dishes have lighter soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
LIGHT WASH For dishes with light soils.
CHINA For lightly soiled china and crystal, use the CHINA CRYSTAL cycle.
CRYSTAL
RINSE ONLY For rinsing partial loads that will be washed later. DO NOT use detergent.
2. START Slowly turn the Dial to the desired position. Don’t turn it past that position, or
you could accidentally miss a rinse. There is a time delay between start-up and
water fill, so you will not hear any wash action right away.
You can locate
your model
number on the
tub wall just
inside the door.
Throughout this
manual, features
and appearance
may var y from
your model.
RINSE ONLY
HEAVY WASH
NORMAL WASH
LIGHT WASH
CHINA CRYSTAL
OFF
1 2
Control Panel
ZBD1800
Water Time
Cycles (approx.) (approx.) Cycle Sequence
HEAVY WASH 6.1 gal. 104 min. Rinse Rinse Rinse Rinse Wash Rinse Rinse
NORMAL WASH 5.3 gal. 98 min. Rinse Rinse Rinse Wash Rinse Rinse
LIGHT WASH 4.5 gal. 92 min. Rinse Rinse Wash Rinse Rinse
CHINA CRYSTAL 3.6 gal. 86 min. Rinse Wash Rinse Rinse
RINSE ONLY 1.8 gal. 56 min. Rinse Rinse