GE Monogram ZBD1800 - Manual (Page 13)

Care and Cleaning
Dishwasher
Exterior
13
Cleaning the Door Panel
Before cleaning the front panel, make sure you
know what type of panel you have. Refer to the
last two letters of your model number. You can
locate your model number on the left-hand tub
wall just inside the door. If your model number
ends with BB, WW or CC, then you have a
Painted Door panel. If your model number ends
with SS, then you have a Stainless Steel Door
panel. If your model number ends with CS, then
you have a CleanSteel Door panel.
Follow the instructions below for cleaning the
door panel for your specific model.
Painted Door Panel (model numbers ending in
BB–black, WW–white or CC–bisque)
Use a clean, soft, lightly dampened cloth, then
dry thoroughly. You may also use a good
appliance wax or polish.
Stainless Steel Door Panel (model numbers ending
in SS)
The stainless steel panels can be cleaned with
Stainless Steel Magic or a similar product using a
clean, soft cloth. Do not use appliance wax,
polish, bleach or products containing chlorine
on Stainless Steel doors.
You can order Stainless Steel Magic #WX10X15
through GE Parts by calling 800.626.2002.
CleanSteel Door Panel (model numbers
ending in CS)
Use a clean, soft, lightly dampened cloth, then
dry thoroughly. Do not use appliance wax, polish
or any chemical agent on CleanSteel doors.
Do not wipe the dishwasher with a soiled dish cloth or
wet towel. These may leave a residue. Do not use
scouring pads or powdered cleaners because these
products can scratch the finish.