GTO Wireless Exit Sensors GTO - Manual (Page 4)

4
W i r e l e s s E x i t S e n s o r
6 inches
deep
Sensor
NOTE: DO NOT place in the direct path of a sprinkler.
The module is water resistant but not waterproof.
• Dig a narrow trench or slit from the Vehicle
Sensor to the transmitter location using a flat
spade or other tool. The wire from the wand to
the transmitter should be at least six inches
deep to avoid possible damage from edgers,
or lawn aerators.
GTO WIRELESS EXIT WAND
TRANSMITTER
CODE
MED
TRANSMIT
ACTIVE MIN MAX
SENSITIVITY
• Feed the Signal Cable through the PVC pipe
and plug into the connector at the bottom of
the Electronics/Transmitter module.
Connecting the Electronics/Transmitter Module
Install the Electronics/Transmitter Module