GE Monogram ZBD3500 - Manual (Page 8)

Flashing Display Lights
Dishwasher
System Lights What It Means What To Do
CLEANSENSOR Error If the sensing light does not come on at the beginning of the NORMAL
or POTS PANS cycle, the CLEANSENSOR is not working. Call for service.
The dishwasher will continue to work without the CLEANSENSOR.
NOTE: This light will not stay on the entire cycle.
START/RESET pad Allow dishwasher to drain and reset before selecting a new cycle.
has been pressed
Control Error Press the START/RESET pad to turn off the beeper. But the
rinsing light will continue to flash. If this continues, call for service.
Control Error Press the START/RESET pad to turn off the beeper and the
dishwasher will attempt to reset. Then restart the wash cycle.
If this error continues, call for service.
8
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND