FujiFilm DIGITAL CAMERA X-E1 - Manual (Page 55)

41
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Sensitivity Sensitivity
“Sensitivity” refers to the camera’s sensitivity to light. Choose from values between 200 and 6400, or
select L (100), H (12800), or H (25600) for special situations. Higher values can be used to reduce
blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright
light; note, however, that mottling may appear in pictures taken at high sensitivities, particularly at
H (25600), while choosing L (100) reduces dynamic range. Values of from ISO 200 to ISO 6400 are
recommended in most situations. If an AUTO option is selected, the camera will adjust sensitivity
automatically in response to shooting conditions; the value in parentheses is the maximum sensitivity
that will be selected when the subject is poorly lit.
1 Press MENU/OK in shooting mode to display the shooting menu. Press
the selector up or down to highlight N ISO and press MENU/OK.
R At default settings, ISO options can also be displayed by pressing the Fn
button.
OFF
3 :2
F
200
P
ISO
SHOOTING MENU
IMAGE SIZE
IMAGE QUALITY
DYNAMIC RANGE
FILM SIMULATION
FILM SIMULATION BKT
SELF-TIMER
EXIT
2 Press the selector up or down to highlight the desired option and
press MENU/OK to select.
P 2000 F5.6 200
P
OFF
3 :2
F
OFF
3 :2
F
200 ISO
SHOOTING MENU O
500
400
320
250
200
L (100)
AUTO (400)
R Sensitivity is not reset when the camera is turned off .
R L (100) is reset to ISO 200 and H (12800) and H (25600) are reset to ISO 6400 when RAW, FINE+RAW, or
NORMAL+RAW is selected for image quality ( P 69). For more information on the settings available with
L (100), H (12800), and H (25600), see page 119.