Fisher & Paykel Aerotech OD302 - Manual (Page 9)

7
Setting the clock
As your oven is connected to a power supply for the first time, a tone will sound and the clock
display will light up. The clock display will show ‘0:00’ and the colon ( : ) will flash. Next, set the
clock.
Clock must be set before oven can be operated
To set the clock
The oven clock has a default 24 hour display. ‘0:00’ will be shown when the oven has been
turned on at the wall and the colon will flash.
1 While the colon is flashing, rotate the setting selector until the correct time of day is showing.
2 Press the button to adopt the time you have set or wait eight seconds and the setting
will be automatically adopted.
Refer to the User Select Options for instructions on how to change the clock to display 12 hour
time.
a Clock Display
b Clock button
- Allows you to set the clock.
c Setting selector/Push to Clear
- Turn this knob to set the: clock/ timer/
probe temperature/ cook time/ stop time.
Press this knob to clear the display.
a
b c