FujiFilm FinePix HS20EXR - Manual (Page 55)

43
More
on
P
h
oto
g
ra
ph
y
White Balance
For natural colors, press the WB button and rotate the command dial un-
til a setting that matches the light source is highlighted in the display.
+
Option Option Description Description
AUTO White balance adjusted automatically.
h Measure a value for white balance.
i For subjects in direct sunlight.
j For subjects in the shade.
k Use under “daylight” fluorescent lights.
l Use under “warm white” fluorescent lights.
m Use under “cool white” fluorescent lights.
n Use under incandescent lighting.
h: Custom White Balance
Choose h to adjust white balance for unusual lighting conditions. White balance measurement options will
be displayed; frame a white object so that it fills the LCD monitor and press the shutter button all the way down
to measure white balance.
• If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value.
• If “UNDER” is displayed, raise exposure compensation (
P 37) and try again.
• If “OVER” is displayed, lower exposure compensation and try again.
1 Note
For greater precision, adjust
P FILM SIMULATION, N ISO, and U DYNAMIC RANGE before measuring
white balance.
1 Notes
• At settings other than
h, auto white balance is used with the flash.
• Results vary with shooting conditions. Play pictures back after shooting to check colors in the LCD monitor.