FujiFilm FinePix HS20EXR - Manual (Page 40)

28
Shooting Mode
For Best Results
For best results, move the camera in a small circle at
a steady speed, keeping the camera horizontal and
being careful only to pan in the direction shown by
the guides. If the desired results are not achieved, try
panning at a different speed.
P P: PROGRAM AE : PROGRAM AE
In this mode, the camera sets exposure
automatically. If desired, you can choose
different combinations of shutter speed
and aperture that will produce the same
exposure (program shift).
3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed and aperture displays will show
“---”. Press the shutter button halfway to measure ex-
posure again.
Program Shift
Rotate the command dial to choose the desired com-
bination of shutter speed and aperture. The default
values can be restored by raising the flash, rotating
the mode dial to another setting, turning the cam-
era off, or selecting playback mode. The flash must
be off for Program shift to be available. Furthermore,
an option other than AUTO must be selected for
U DYNAMIC RANGE and N ISO.
250 F4.5
Shutter speed
Aperture