Fisher PDG-DWT50L - Manual (Page 80)

5. Using On-Screen Display
71
Setting Menu Descriptions and Functions
The Setup menus contain the most often used settings during installation and options to customize the general output of
the projector. Three tabs are accessible through the Setup menu, general, installation and option.
Basic
The Basic tab contains general setup options such as lamp mode and OSD language settings and can be accessed with
the projector control panel or with the remote control unit.
The following table lists all functions with a brief description.
I TEM D ESCRIPTION
Keystone
Adjust the Keystone trapezoid ( see Keystone page 72 ).
Lamp control Select Lamp control. Range: Normal or Eco.
Lamp mode Select Lamp configuration. Range: Dual, Lamp1 or Lamp2.
Lamp interval Select Lamp interval. Range: Off, 1 week, 4 weeks or 2000 hours.
Simple menu Displays menus with minimum essential options. This setting is best suited to novices.
Language Select the OSD language (see Language on page 74 ).