Fisher PDG-DWT50L - Manual (Page 33)

2. Installation and Connections
24
Installing the Optional Color Wheel
The PDG-D WT50L projector comes with a four-segment color wheel installed. An additional six-segment color wheel is op-
tional. To replace the color wheel (located under the lamp cover adjacent to lamp 1) refer to the following guide.
Note:
Wait until the lamp house and the color wheel cool off.
1. Loosen the captive screw (A)
on the lamp cover.
2.
Remove the lamp cover by
sliding it in the direction of
the arrow (B).
3.
Unscrew the retaining screws
(x 4) on the four-segment
color wheel.