Fujitsu Siemens Computers 4312 FA - Manual (Page 17)

Colour monitor 4312 FA
14 - English S26361-K841-V150-1-5E19
Depending on the function (in this case Contrast ), additional adjustment functions are offered.
Bright Colors
0
Dark Colors
0
i
K
Ê Press the MENU button to select from the
displayed adjustment possibilities (in this
case
Bright Colors and Dark Colors ).
Ê Use the - or + button to make the desired
setting.
Ê Press the EXIT button twice to exit the
OSD menu.
All changes are stored immediately.
All modifications are automatically stored if no button is pressed in an active setting window for
approx. 3 seconds.
Adjusting the brightness
Setting the brightness of the display ( Brightness )
Adjusting the contrast
Calling the Contrast setting window
Setting picture definition and eliminating picture interference
Calling the Image Lock setting window. This function adapts the monitor to the
screen controller of your PC.
Fine Eliminate picture noise or horizontal lines
Coarse Eliminate vertical bars
Adjusting the horizontal position
Calling the Position setting window
Shifting the picture to the left
Shifting the picture to the right