Changing the quality setting ([ quality]) – FujiFilm FinePix BL00677-200(1) User Manual
Page 76

76
[p-MODE MENU] (Photography)
Changing the quality setting
([
QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
Area shot and quality setting
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (
➝p.154). The numbers
to the right of setting show the number of available
frames.
• The quality setting is fixed to ` when photography
mode is set to
(
➝p.54).
• [
ISO] is limited to 1600 when [
QUALITY] is set to
i or %. The [
ISO] setting automatically changes
and is displayed in yellow in the LCD screen. When
[
QUALITY] is set to other than i or %, the
restriction is cleared.
Quality mode
Sample uses
i F (3264 × 2448)
i N (3264 × 2448)
Printing at up to 10R (25.4 × 30.5 cm/
10 × 12 in.) / A4 size / A3 size
For better quality, select i F
% (3264 Ч 2176)
4 (2304 Ч 1728)
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
12
12/ 31
31/ 2050
2050
10
10: 00
00 AM
AM
12
12/ 31
31/ 2050
2050
10
10: 00
00 AM
AM
12
12/ 31
31/ 2050
2050
10
10: 00
00 AM
AM
12
12/ 31
31/ 2050
2050
10
10: 00
00 AM
AM
AUTO
AUTO
Area shot excluding %
Area shot with %
Setting the menu (
➝p.72)