FujiFilm FinePix BL00677-200(1) - Manual (Page 149)

149
Troubleshooting
Z Connecting
Z Others
Matters Problems Possible causes Solutions Page
Connecting to TV
There is no image
or sound on the
TV.
The camera is not connected to the TV
correctly. Connect the camera and TV correctly.
120
The included A/V cable was connected
during movie playback. After the movie playback mode is stopped,
connect the camera and TV correctly. 109,
120
“TV” is selected as the TV input. Set the TV input to “VIDEO”. –
The video output setting is incorrect. Change the setting to [NTSC] or [PAL]. 111,
113
The TV volume is turned down. Adjust the volume. –
The TV image is
black and white. The video output setting is incorrect. Change the setting to [NTSC] or [PAL]. 111,
113
Connecting to PC
PC does not
recognize the
camera. The USB cable is not correctly connected
to the PC or camera. Set up the camera, and connect the USB
cable correctly.
131
Connecting to
printer Cannot print with
PictBridge.
• The USB cable is not correctly
connected to the printer or camera.
• The printer is not turned on.
• Set up the camera, and connect the USB
cable correctly.
• Turn the printer on.
122
Matters Problems Possible causes Solutions Page
Camera operation
etc.
Nothing happens
when pressing the
buttons on the
camera.
Camera malfunction may be caused
temporarily. Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
16,
17,
121,
The batteries have run out. Load new or fully charged batteries. 16, 17
The camera no
longer works
correctly.
Camera malfunction may be caused
temporarily. Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again. If you think the
camera is faulty, contact your FUJIFILM
dealer.
16,
17,
121