FujiFilm FinePix BL00677-200(1) - Manual (Page 74)

74
Using [p-MODE MENU] (Photography)/[SHOOTING MENU]
[ CONTINUOUS]
(
➝p.81)
This setting can be used when the Mode dial is set to anything other
than
and .
Use this setting to select the required Continuous shooting mode.
[OFF]/f/j/h/
/
[OFF]
[H FOCUSING]
( ➝p.84)
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing mode.
/ /
[ AF MODE]
( ➝p.86)
This setting can be used when the Mode dial is set to N, <, M, or >.
Use this setting to specify the focusing area.
/ /
[GSHARPNESS]
( ➝p.88)
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to soften or emphasize the outline of an image. [HARD]/
[STANDARD]/
[SOFT]
[STANDARD]
[ FLASH]
(
➝p.88)
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to adjust the amount of light emitted by the flash to suit
the photography conditions or to achieve a desired effect. –2/3 EV to +2/3 EV
in approx. 1/3 EV
increments
0
[ BRACKETING]
(
➝p.89)
This setting can be used when the Mode dial is set to N, <, M or >.
Use this setting to photograph the same image with different exposure
settings.
±1/3 EV, ±2/3 EV,
±1 EV
±1/3 EV
Menu Functions Settings
Factory
default