FieldServer FS-8700-101 - Manual (Page 19)

FS-8700-101_Setra Model 370 Digital Pressure Gage Manual Page 19 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel : (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
Appendix B. Troubleshooting tips
Appendix B.1. Connection Tips & Hints
The digital pressure Gage must be left in an operational state, in which it is able to respond
to the commands (polls) sent by the FieldServer. It is possible to enter a configuration mode
using the buttons on the front panel of the Gage and then fail to complete the configuration
sequence. In such cases, the Gage will not be able to respond to polls from the
FieldServer. This problem can be eliminated by ensuring that, after operating the Gage
from the front panel, that it is left in a mode where it is displaying the current measured
pressure.