FieldServer FS-8700-101 - Manual (Page 18)

FS-8700-101_Setra Model 370 Digital Pressure Gage Manual Page 18 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel : (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]
Appendix A.2. Gage Pressure Units
The driver does not report status and pressure reading units as text strings. Rather, the
driver reports and index number. Use the index number and the table below to determine
the units being reported.
Index # Meaning
0 The Units field could not be interpreted correctly / there were no units reported
/ the units reported were not part of the following list. This may be the case if
the Gage is reporting some custom units that the driver does not recognize.
1 HPA
2 PSI,
psi
3 mbar, MBAR
4 MmHG, mmHg,
5 MmH20
6 InH20
7 ft,
FT
8 m. M
9 Units
10
inHG, In HG, IN HG
Appendix A.3. Driver Limitations & Exclusions
This driver implements a subset of the commands defined by the protocol. The commands
that have been implemented have been selected to provide relevant real time data transfer
and have omitted configuration/setup functions.
The following table lists the commands that have been implemented.
Command Code Implemented
Immediate Print of Pressure Reading P Yes
Status Print SP Yes
Verification String V Yes
All others No