FUJITSU RELIABILITY D1859 - Manual (Page 14)

External ports
8 D1859 (Econel 50)
External ports
1 3
4 5
2
6 7 8
1 PS/2 mouse port 5 VGA port
2 Parallel port/printer 6 Serial interface COM1
3 LAN connector (10/100/1000 Mbit/s) 7 USB1 connector
4 USB0 connector 8 PS/2 keyboard board
LAN connector
The system board is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN
controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller
supports the WOL functionality through Magic Packet
TM , Basic Alert-on-LAN II and ASF 2.0 (Alert
Standard Format).
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and
Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
2 1
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights green or yellow:
Link Mode: the LAN connection is active.
10 Mbit/s
off
100 Mbit/s green
1000 Mbit/s yellow