Specifications, Furuno, Specifications of ais receiver fa-30 – Furuno FA-30 User Manual
Page 25
FURUNO
FA-30
SP-1
E4443S01A
SPECIFICATIONS OF AIS RECEIVER
FA-30
1. GENERAL
1.1 Rx Capacity
2250 reports/minute, 1 channel
4500 reports/minute, 2 channels
1.2 Rx System
TDMA dual wave simultaneous reception
1.3 Frequency Switching
Automatic (external device)
1.4 Complying Regulations IEC 60945 Ed. 4, and receiver section conforms to IEC 61993-2,
IEC 62287-1, ITU-R M.1371-1,
2.
AIS RECEIVER (RX1/RX2)
2.1 Rx Frequency Range
156.025 MHz to 162.025 MHz
2.2 Channel Interval
25 kHz/12.5 kHz
2.3 Oscillator
Frequency 1
st
local oscillator f+(51.136 MHz/51.236 MHz)
2
nd
local oscillator 51.1 MHz/51.2 MHz
2.4 Intermediate
Frequency 1
st
IF 51.136 MHz/51.236 MHz
2
nd
IF 36 kHz
2.5 Rx System
Double superheterodyne
2.6 Sensitivity
-107 dBm (PER less than 20%)
2.7 Error Characteristics
-77 dBm (PER less than 2%)
-7 dBm (PER less than 10%)
2.8 Channel Rej.
Better than -10 db
2.9 Adjacent Channel Rej.
Better than 70 dB (±25 kHz)
2.10 Spurious Response
Better than 70 dB (50 MHz – 520 MHz)
2.11 Mutual Modulation
Wanted freq. f – 101 dBm
Characteristic
Unwanted freq. f ±50 kHz, no modulation –36 dBm
f ±100 kHz, 400 Hz/±3 kHz modulation –36 dBm
PER less than 20%
2.12 Sensitivity Suppression Wanted freq. f –101 dBm
Unwanted freq. f ±500 kHz, ±1 MHz, ±2MHz,
no modulation –23 dBm
Unwanted freq. f ±5 MHz, ±10 MHz, no modulation –15 dB
PER less than 20%
2.13 Spurious Emission
9 kHz – 1 GHz less than –57 dBm
1 GHz – 4 GHz less than –47 dBm