Furuno FA-30 - Manual (Page 14)

6
2. WEB SOFTWARE SETUP,
DATA DISPLAYS
2.1 AIS Receiver FA-30
The FA-30 has no power switch. Power is fed from the ship’s switchboard, and a pow-
er switch on the switchboard turns the FA-30 on or off. When powered, the PWR LED
(green) on the cover lights. The two other LEDs on the cover flash or light with equip-
ment state. The ER LED (red) lights while the equipment is being initialized, and flash-
es when equipment error is found. The RX LED (orange) lights when receiving.
RX LED
Lights (in orange) 50 ms when channel RX1/RX2 is receiving.
ER (Error) LED
Flashes (in red) for RAM, ROM, RX1+RX2 error.
PWR (Power) LED
Lights (in green) when power is on.