beautypg.com

FujiFilm F45fd User Manual

Page 144

background image

144

Warning Displays

CARD ERROR

• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.

• Wipe the contact area on the Memory Card with a

soft, dry cloth. It may be necessary to format the

Memory Card (

➝p.113). If the message still

appears, replace the Memory Card.

• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your

camera.

• Contact your FUJIFILM dealer.

• Insert a compatible Memory Card that is

operationchecked at FUJIFILM Corporation.

\ CARD FULL

Y CARD FULL

The internal memory or Memory Card is full.

Erase some images in internal memory or Memory
Card (

➝p.43), or use a Memory Card that has ample

free space.

WRITE ERROR

• The data could not be recorded due to a Memory

Card error or a connection error between the
Memory Card and camera.

• The image cannot be recorded as it is too large to

fit in the available space on the Memory Card.

• The Memory Card or internal memory is not

formatted.

• Re-insert the Memory Card or turn the camera off

and then on again. If the message still appears,
contact your FUJIFILM dealer.

• Use a new Memory Card.

• Format the Memory Card or internal memory on

the camera (

➝p.113).

PROTECTED CARD

The SD Memory Card switch is slide to the “Lock”
side.

Unlock the protection by sliding it back (

➝p.20).

INTERNAL MEMORY IS

FULL

INSERT A NEW CARD

The data could not be recorded or copied since the
internal memory is full.

Erase some images from the internal memory
(

➝p.43), or use a Memory Card that has ample free

space.

r BUSY

The timing for recording was incorrect because the

Memory Card was formatted on a PC.

Use an Memory Card that was formatted on the
camera.

FRAME NO. FULL

The frame number has reached 999-9999.

A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the

U SET-UP menu (

➝p.110).

C Start taking pictures (The frame number starts

from “100-0001”).

D Set CONT. as the FRAME NO. setting in the U

SET-UP menu.

Warning Displayed

Explanation

Remedy