Freecom Technologies Storage Gateway NETWORK HARD DRIVE User Manual

Page 91

Mac OS X: Installing a USB printer

To install a USB printer, connect the printer to one of the USB host ports on the FSG.
Check to make sure the FSG is on. Then turn the printer on.

1. Connect a USB printer to the FSG.

2. Open the FSG Configuration page and check whether the printer was detected

under 'Information' -> 'USB'.

3. Open 'System preferences' -> 'Printing & Faxing'.

4. Click '+' to add a new printer.

5. The 'Printer Browser' opens. Select 'IP printer' as the printer type and select the

following settings:

Protocol:

HP Jet Direct-Socket

Address:

192.168.1.1:9100 (replace 192.168.1.1 with the IP address that
you set for your FSG)

Queue name:

You may leave this field blank.

A list of available printer drivers is now compiled.

Setting up a printer