Freecom Technologies Storage Gateway NETWORK HARD DRIVE - Manual (Page 111)

111
GB
5
Example: Setting up a wireless ACL filter
1. Go to 'Wireless ACL'. Click 'New' to add devices to enabled or restricted.
2. On this page, you can set enabled/restricted by checking or unchecking 'enabled' /
'disabled'. Enter any name in the Name field. Click 'Apply' to confirm your entries. In
this case, we are using 'Example'.
3. You are now back at the Wireless ACL screen, where you can select either 'allow all
in list' or 'deny all in list' for the connection. Click 'Apply' to accept the final settings.
Establish a WLAN Connection to Your FSG.