FujiFilm Pivi MP-300 - Manual (Page 8)

14 15
■ Photo pack and print care
1. Keep a photo pack in a cool and dry place. Do not leave a photo
pack in a place where the temperature is extremely high (e.g. in a
closed car) for long periods.
2. When you load a photo pack, use all the fi lms as soon as possible.
3. If a photo pack has been kept in a place where the temperature is
extremely high or low, leave it at normal room temperature for a while
before starting to print.
4. Be sure to use the photo pack within the validity period.
5. Avoid airport checked luggage inspection and other strong X-ray
illumination. The effect of fogging, etc. may appear on unused fi lms.
We recommend that you carry the printer onto the aircraft as carry-on
luggage (Check with each airport for more information).
6. Avoid strong light, keep the prints in a cool and dry place.
■ Using the AC power adapter
1. Use the AC power adapter indoors only.
2. Plug the power cord securely into the DC input terminal of the printer.
3. Turn off the printer before disconnecting the power cord from the
printer’s DC input terminal. To disconnect, pull out the plug gently. Do
not pull on the cord.
4. Do not use the AC power adapter with any device other than your
printer.
5. During use, the AC power adapter may become warm to the touch.
This is normal.
6. Do not disassemble the AC power adapter. Doing so could be
dangerous.
7. Do not use the AC power adapter in a hot and humid place.
8. Do not subject the AC power adapter to strong shocks.
9. The AC power adapter may emit a humming. This is normal.
10. If used near a radio, the AC power adapter may cause static. If this
happens, move the printer away from the radio.
Use the FUJIFILM AC Power Adapter AC-5VX (sold separately).
The use of an AC Power Adapter other than AC-5VX may result in
damage to your printer.
■ Using USB interface
1. Use the USB cable suitable for the digital camera or camera phone.
2. Ensure that the USB cable is no more than 3 meters (9.8 ft.) long.
Handling & Care