FujiFilm Pivi MP-300 User Manual

Page 12

tti

Getting Ready

Open the photo pack door.

Hold the pack by the sides and drop
it straight in. Never press on the 2
rectangular holes in the back.

Turn off
(11 sec.)

Blinking
(5 sec.)

Lit (POWER button)

Hold down the POWER button (one
second or more) to turn the printer on.

x The fi rst time the printer is turned

on after photo pack is loaded, the
printer performs internal printing
preparations. The printer receives data
while the motor is running and printing
starts when preparation is completed.

x When the POWER button lights and

“10” appears on the fi lm counter, the
printer is ready to print.

Turning on the power.

When closing the photo pack door,
press the door until click shut.

Close the photo pack door.

Turquoise mark on
the photo pack

Turquoise mark inside
the printer

Loading the photo pack.

Getting Ready to Print

Loading the photo pack

While holding down button

1, slide

knob

2 in the direction of the arrow.

1 2

The fi lm is sensitive to light and dust. Light inside the photo pack may
expose the fi lm, causing incorrect printing of images. Also, any dust
inside the photo pack or printer may scratch the fi lm. Always observe
the following precautions when using photo packs.

◆

Photo pack care

◆

●

Avoid exposure to light.

●

Avoid exposure to dust.

zAvoid exposure to direct sunlight when loading

the photo pack.

z Never press on the 2 rectangular holes in the

back.

z Stopping midway or re-opening the door before it

is fully closed risks exposing the photos.

z Avoid exposure to dust when loading the photo

pack.

z Do not remove the photo pack’s inner packaging

until just before loading it directly into the printer.

Photo pack loaded

No photo pack

This window allows you to check
whether there is a photo pack loaded
into the printer.

Photo pack confi rmation window